You can click on the pictures on this page for a larger version.
The Linus Shares the Gospel display was added to the display for Christmas 2000. For Christmas 2002, Linus became part of our Peanuts Nativity Pageant display. This article will take you through the progression of how this display item was conceived, how we used an old Kodak slide projector to add "speech bubbles" for many years, how it came to be epanded into an entire Nativity, and then how it was converted to use video projection instead of the mechanical slide projector.
Linus' display is unique in that it shares the gospel message via projected speech bubbles. If you've read the Why We Do It page, you know that we try to use our Christmas display as a subtle ministry tool to help spread the good news of the birth of Jesus Christ, as well as provide a statement of our faith. With this display (and now the full Nativity Pageant), we are able to do this much more directly.
The idea for this display came while Cathy and I were in a store looking through the Christmas display items for sale, and a "Snoopy On Dog House" display caught our eye. The Charlie Brown Christmas special has always held a special place in my heart, not only because I'm a huge fan of Charlie Brown and the Peanuts gang, but it is one of the very few "mainstream" Christmas specials that shares the true meaning of Christmas: the birth of our Savior. Cathy and I talked over the possibility of creating a Linus character, and having him quoting the scripture from Luke that he quotes in the TV special, and incorporating the Snoopy display to complete the effect.
We had considered putting this off until 2001, since it was getting close to "lights on", but after Cathy was sharing our plans with some friends from church choir, one of them liked the idea so much that they gave us the Snoopy display as a gift to get us started. So, this became my motivation to get it done for Christmas 2000.
Linus is based on an actual video capture from the the segment in the TV special where he tells Charlie Brown "what Christmas is all about." Cathy, being the artistic one, painted him on a piece of plywood with acrylic paints, and we used clear polyurethane for protection and weatherproofing.
Lessons to be learned in weatherproofing a
Well, it wasn't enough. Initial tests showed the box heating up, but not severely. So we set it up for real and thought the display was finally on-line. To my dismay, after a few hours, I looked outside and the projector had shut down. Inspecting the damage, I found things had really overheated. The projector wouldn't power up at all, and the slides had warped badly. I thought this spelled the end of the "shares the Gospel" part of our display for that year. It really ruined my night.
Upon further inspection, it turned out the damage wasn't as bad as I thought. The projector wasn't 'fried', but a thermal fuse designed for factory service had blown. I immediately ordered a replacement part, and determined that we just might have it working for Christmas 2000 yet. Cathy and I sorted out the 'totally ruined' slides from the 'warped but usable' slides, and we recreated replacements for the 'ruined' bunch. And I "went crazy" with ventilation for the box. With some creative uses of Tupperware-type containers, I added large (and hopefully weatherproof) vents to both sides of the box, as well as the top. I also included a PC cooling fan which comes on with the projector.
The temperature in December 2000 remained below zero degrees Fahrenheit the entire season, but the box heated up to 55 degrees or higher. This temperature differential made me very nervous, so I beefed up the cooling capacity of the box for 2001. I used a blower that came out of our old dishwasher, connected a 4" flexible duct, and positioned it directly against the output of the projector (see the picture above). The effect is to draw the warm air directly from the projector and expel it outside the box, rather than simply venting the box. This setup worked very well for years, as we used it from 2001-2008 without any major changes.
For the 2001 display, we substituted a slide in memory of our golden retriever Sampson, who passed away in October of that year.
For the 2002 season we added the Peanuts Nativity Pageant and Linus is now the Narrator for this pageant. Since the pageant contains a new Snoopy figure, the original "Snoopy on Doghouse" has been separated from Linus, and is used in the "Toyland" section of our display.
For the 2004 season we replaced the projection screen. Previous displays used a simple plywood screen covered in plastic. This required front projection, with the projector box visible in the middle of the yard. For 2004, we built a rear-projection screen by sanding a piece of Plexiglas to make it cloudy, and building a wooden frame for it. We also purchased a wide-angle lens for the projector, which could now be placed directly behind the screen. The result was a better visual presentation of the Gospel message.
For the 2009 season we finally abandoned the old slide projector and switched to video projection. To keep the spirit of the Linus display (and the Gospel message) alive, we maintain the "speech balloon slides" for about half of the songs. The other half of the songs contains video synchronized to the music and lights. It was a nice update to one of our older homemade displays.
For the 2010 season we upgraded to a better video projector, which greatly improved the brightness over the 2009 projector, and even over the old slide projector. Having video gives the display a whole new element.
So thanks to the Peanuts gang and Charles Shultz, viewers of our display are able to see the real meaning of Christmas.
This page was last updated on Thursday, November 07, 2013